HouseBot

Good afternoon all,

Here is an issue I feel is of prime importance.

A great deal of peripherals still communicate via RS232 serial port and newer computers only have USB ports.

The problem is having Housebot recognize a USB ported peripherals or having Housebot recognise a Serial to USB converted port.

Without this feature, Housebot is crippeled.

Is there something that can be done to remedy this problem.

Dom

Well I have 13 true com ports on my system, 4 USB -> Serial com ports and 4 devices that are USB based but use the FTD2XX to make a virtual com port on a USB device. I haven't seen a Serial -> USB yet. I just picked my hardware so that it has a serial port on it. I really dislike USB mainly because of max cable length. That is not an issue with RS232 Com ports and HouseBot has the truely great Generic Serial device which makes it possible to write comms drivers to your own liking.

Good afternoon Richard,

I apologize, your are absolutely right, I found the feature about the comm port, somewhere in the documentation.

I do have a tendency have putting my foot in my mouth from time to time, no a comfortable move if you consider I wear size 12.

I will keep on reading.

Dom